Many NAS are expensive kits, but NSA310 (1 bay) is currently available for 88.50 and NSA320 (2 bays) for 95.34 on Amazon, which is just a little cheaper than the DIY Cubieboard NAS solution (100 USD). From there, you can load a Linux kernel of your choice. The 2 devices appear to have been released at the end of 2011, and are powered by a Marvell ARMv5 compatible processor. With this tool you can get an u-boot prompt, as bbradley did, but without opening the NAS. This timeout can be defined with option "-w". In case of batch commands, CLUNC will close itself after a inactivity time. Affected Products: ZyXEL NAS products running firmware version 5.
#NSA 2400 ZYXEL FIRMWARE DOWNLOAD#
Or to send a batch of commands via the standard input 168 -Upload and download firmware images and system settings. If a command was running, the break will abort it. If an U-Boot is already in NetConsole mode, the session will be resumed.īefore resuming a session, CLUNC sends a break character (Ctrl+C) to U-Boot. If you want to move the script, you must move the tool clunc-openĬLUNC must be launched before switching on the NAS.
#NSA 2400 ZYXEL FIRMWARE UPGRADE#
It includes a shell script named clunc which needs 2 components:Ģ) netcat should be provided by your distribution. Sonicwall Nsa 5650 Firewall Appliance 22 Port 01ssc4342 7600.00 Fortinet Fwf60dpoe Firewall Wireless Free Shipping 97.06 Watchguard Firebox T10 Firewall Router Ds1ae3 69.99 Cisco Asa5505bunk9 Security Firewall Upgrade Asa5505 49.90 Fortinet Fortigate Firewall Fg60dpoe. Some NAS (or U-Boot versions) doesn't support this feature.
It is possible to target a NAS by its MAC address with the option "-m". The first LaCie NAS which is booting will be stopped by the LUMP.
This address can be set via the LUMP with the option "-i". The network interface of the NAS must have an IP address which Currently, NSA-220 with firmware version 3.12 or earlier does not support PHP/MySQL. Netcat is used to communicate with the NetConsole of U-Boot. It is now possible to send commands and receive answers via UDP. When U-Boot receives a packet, it switches to the NetConsole mode.Ī prompt is sent to clunc-open which stops sending LUMP. Client to connect on the NetConsole of the U-Boot which is customized by LaCieĬLUNC is a shell script which needs 2 components:Ģ) netcat (also called nc) which uses the session.įirst, clunc-open broadcasts a magic packet (LUMP) in a loop.
0 kommentar(er)
